DELO Unveils the "Liquid Tape": A Light-Cure Adhesive That Replaces Cut Tape in Fuel-Cell Assembly
German adhesive specialist DELO has introduced what it describes as the world's first "liquid tape" for fuel-cell gas-diffusion-layer (GDL) fixation – DELO PHOTOBOND PS4140. Rather than a roll of pressure-sensitive tape that must be cut and placed by hand, the product is a liquid pressure-sensitive adhesive dispensed directly onto the part, then cured in seconds with light. DELO positions it as a fully automated, waste-free alternative to conventional tape-based fixation in fuel-cell stack production.
Why a liquid takes over from tape
Fixing the gas diffusion layer to its frame is a routine but stubborn step in fuel-cell manufacturing. Traditional tape needs to be cut to size, which generates offcuts and material waste, and the manual handling makes it hard to integrate into a high-throughput, automated line. For cell makers under pressure to scale output, that bottleneck matters.
PS4140 reframes the problem: instead of a pre-cut strip, the adhesive is dosed in any geometry the process needs – no cutting, no trimmed-off scrap. Because it is applied as a liquid and cures almost immediately, the bonded parts move straight to the next station.
The numbers that matter
As a liquid PSA, the material is engineered to survive the demanding environment inside a fuel cell:
- Peel resistance up to 0.9 N/mm on PET/PET substrates;
- Glass-transition temperature of –10 °C, keeping bonds flexible and stable in low-temperature operation;
- Water absorption of just 0.7 wt.%, so the layer stays dimensionally stable under the high, persistent humidity of a running fuel cell;
- Confirmed mechanical stability after storage in application-relevant media.
Together, these properties let the adhesive absorb the peel loads typical of roll-to-roll fuel-cell manufacturing – one of the most common production methods in the sector.
How it is applied and cured
PS4140 is a single-component system, easy to store at 0 to +25 °C. DELO evaluated several application routes – automated jetting through the DELO-DOT PN5 pneumatic valve, slot-die coating, screen printing and stencil printing. Curing is energy-efficient under UV or visible light; in the visible range at 400 nm, it takes 5 to 16 seconds depending on intensity. Once cured, the surface is immediately tacky, and after a light-pressure join the part is ready for the next process step.
"With DELO PHOTOBOND PS4140 we give fuel-cell manufacturers an alternative to conventional tape that also delivers all the advantages of a liquid adhesive: precise dosing, fully automated processing and curing in seconds," said Julian Hopf, Product Manager Energy Storage and Conversion at DELO. "That adds up to a process that is faster, more reliable and more resource-efficient than the traditional approach."
What it signals for the tape industry
The launch is a useful marker of where bonding is heading in high-volume, automated production: in applications where a tape's cut-and-place step becomes the constraint, a light-cure liquid adhesive can remove both the waste and the manual handling. DELO first showed the product at Hydrogen Technology Expo 2026 (20–22 October, Hamburg, booth 7A47). For tape converters and suppliers, it is a reminder that "sticky on command" is increasingly being delivered as a dosed liquid rather than a slit roll – and that process integration, not just adhesion, is becoming the deciding factor.
Source: DELO Industrial Adhesives – "Liquid tape for fuel cell manufacturing" (press release, Oct. 2026). Original: https://www.delo-adhesives.com/news-and-dates/press-and-media/press-release/detail/liquid-tape-for-fuel-cell-manufacturing
VIP会员
