As the adhesive tape industry moves up the value chain toward higher-performance, application-specific products, more attention is turning to a component that almost no end-user ever sees: the release liner. Ahead of Adhesives & Bonding Expo Europe 2026 (10–12 November, Messe Stuttgart, Germany), suppliers are stressing that liner selection increasingly decides whether a tape can be coated, converted, wound and applied reliably.
What a release liner actually is
A release liner is the carrier — paper or film — coated on one or both sides with a low-surface-energy release agent, almost always silicone. It protects the tacky face of a pressure-sensitive adhesive during roll manufacture and is stripped away at the point of application. Without it, a roll of PSA would simply bond to itself.
Why the liner matters as much as the adhesive
The liner influences coating uniformity, converting yield, die-cutting quality and the behaviour of the finished roll. Its substrate and release coating must be matched to the adhesive chemistry, the tape's construction and the production conditions — coating speed, temperature and storage or ageing. Get the match wrong and you see adhesion build-up, liner picking, or tapes that will not release cleanly on the converting line.
Paper or film: the two families
Paper liners come in several grades, each with different basis weight, thickness, stiffness and converting behaviour: Glassine (dense, smooth, translucent), SCK (super-calendered kraft), CCK (clay-coated kraft), PCK (poly-coated kraft) and MGK (machine-glazed kraft). PET release films are chosen when dimensional stability, flatness, transparency or tight thickness control are decisive — common in optical and electronics-grade tapes.
One side or two — and differential release
Constructions that release from a single surface use single-sided silicone-coated liners. Double-sided and transfer tapes, however, must manage adhesive on both faces during winding and unwinding. Where the layers need to part in a set sequence, a differential release (different release force per side) controls the order in which they separate.
What converters should bring to the table
At the show, suppliers such as HENGMU (Hall 1, Booth 721) are inviting tape makers to discuss liner specifications against real production data: adhesive type and coating conditions, paper basis weight or PET thickness, release-force targets and test methods, release behaviour after storage or ageing, slitting, die-cutting and liner-removal requirements, and roll width, length, core size and volume.
Industry takeaway
With electric-vehicle, electronics and specialty-foam applications driving ever-tighter tolerances, the "invisible" liner has quietly become a competitive differentiator. The Stuttgart expo (10–12 November 2026) is a timely reminder that tape performance is engineered from the backing all the way down to the liner it is wound on.
Source: HENGMU Group, "HENGMU at Adhesives & Bonding Expo Europe 2026: Release Liners for Adhesive Tapes" (hengmugroup.com); Adhesives & Bonding Expo Europe 2026, Messe Stuttgart, 10–12 November 2026.
VIP会员
