会员登录|免费注册|忘记密码|管理入口 返回主站||保存桌面|手机浏览|联系方式
VIP   VIP会员第1年

Shenzhen Chinian Adhesive Industry Co.,ltd  
加关注0

3M Double side adhesive tape / single side adhesive tape/ 3M Dual lock

搜索
新闻分类
  • 暂无分类
联系方式


请先 登录 或 注册 后查看


站内搜索
 
荣誉资质
  • 暂未上传
友情链接
  • 暂无链接
首页 > 公司新闻 > tesa Expands Flexo Plate-Mounting Range With Softprint QuickMount and a Breathable Liner
公司新闻
tesa Expands Flexo Plate-Mounting Range With Softprint QuickMount and a Breathable Liner
2026-11-106

tesa Expands Flexo Plate-Mounting Range With Softprint QuickMount and a “Breathable” Liner

tesa has introduced a new member of its flexographic plate-mounting family, the tesa® Softprint QuickMount, built around a through-venting liner technology the company says directly targets the two most persistent headaches in flexo print rooms: trapped air bubbles and slow plate changes. The addition was announced at the start of November 2026 as part of tesa’s continued push to make plate mounting a lever for overall press efficiency rather than a hidden source of downtime.

Why plate mounting decides print quality

In flexographic printing, the plate-mounting tape sits between the photopolymer plate and the sleeve or cylinder, and its density and construction govern how accurately the image is transferred to the substrate. As flexo quality increasingly competes with gravure, the right mounting solution has become critical. At the same time, brand owners are demanding more design changes and faster time-to-market, which multiplies job changes and puts intense pressure on the mounting department and press operators to squeeze maximum throughput from every press.

Two failure modes dominate that pressure: air entrapment beneath the plate, which causes print-quality fluctuations and forces re-mounts, and long, experience-dependent changeovers that eat into productive run time.

What the new through-venting liner does

QuickMount’s headline innovation is a structured, “breathable” liner that creates micro-channels within the adhesive, letting air escape during both mounting and printing. tesa describes the effect as a bubble-free result with no re-mounts required. The approach follows the same logic as the company’s established “snake-skin” structured liner, extended into a faster, more forgiving mounting path.

Supporting the liner, tesa’s FE-X adhesive holds plate edges firmly down to prevent plate lifting while still allowing easy repositioning and clean demounting at the end of a job. Together, the liner and adhesive are engineered to deliver:

  • Effortless air removal during mounting and printing — fewer bubbles, fewer re-mounts.
  • Secure edge bonding that resists lift across a broad temperature and humidity range.
  • Smooth manual or machine application with an improved tape surface.
  • Consistent, high-quality print results from carefully selected, intact closed-cell foam.

The broader Softprint platform

QuickMount sits inside the wider tesa® Softprint assortment, which spans two thickness categories (15 mil and 20 mil) and two product designs — CLASSIC, pairing closed-cell PE foam with a PET reinforcement film for easy handling across many applications, and FLEX, with an aligned PE-reinforced design suited to critical thin-walled or scratched sleeves. The range offers five hardness levels from extra-soft to hard, letting printers match foam density to halftone, process, and solid work.

tesa positions plate mounting as a direct route to higher overall equipment effectiveness: the right foam hardness avoids defects such as excessive dot gain or pinholing, resilient foams permit faster machine speeds with fewer on-press adjustments, and the right plate-side and sleeve-side adhesives prevent edge lift while keeping demounting residue-free. The company backs the portfolio with on-site training and a global field network of flexo specialists.

Industry takeaway

For converters running flexo — whether in flexible packaging, labels, or corrugated — the mounting tape is a low-cost, high-leverage component that quietly sets the ceiling on both quality and uptime. tesa’s latest move pushes the category toward “right-first-time” mounting: less air, less waste, and faster changeovers as job counts keep climbing. As flexo continues to close the gap with gravure, expect more supplier investment in liner and adhesive engineering aimed squarely at the mounting step.

Source: tesa — “The Secret Behind Every Happy Printer?” (tesa® Softprint plate-mounting solutions) and the 3 Nov 2026 launch coverage of tesa® Softprint QuickMount (the ‘easy-apply’ mount): tesa.com Softprint story