Regulators Tighten Scrutiny on Phthalates and Flame Retardants in Adhesive Tapes
Two separate regulatory developments in Europe are sharpening the focus on what actually goes into an adhesive tape — from the plasticisers inside a PVC backing to the flame-retardant additives in a fire-rated construction tape. The European Adhesive Tape Association (Afera) flagged both tracks in an industry briefing published on 26 October 2026, warning that material selection, product compliance and supply-chain transparency are all in scope.
Phthalates: a wider group heads toward harmonised classification
France’s Agency for Food, Environmental and Occupational Health & Safety (ANSES) has proposed a harmonised classification, under the EU’s Classification, Labelling and Packaging (CLP) Regulation, for a broader group of medium-chain ortho-phthalate esters. If adopted, the move would pull more than 40 phthalates into reproductive-toxicity Category 1B and endocrine-disruption Category 1 classifications — for both human health and the environment — and would apply a cumulative assessment to mixtures that contain several group members, reflecting their potentially additive effects.
The dossier has already moved through a first public consultation (26 January–27 March 2026) and a targeted ECHA consultation (24 August–4 September 2026), and is now before the European Chemicals Agency’s Committee for Risk Assessment (RAC). For tape makers, the immediate relevance is plasticised PVC backings — including those used in electrical insulation and certain specialist tapes — as well as potentially affected adhesive raw materials. Afera advises manufacturers to establish exactly which plasticisers their suppliers use and whether they fall inside the proposed group definition.
Brominated flame retardants: global controls take a step forward
Separately, two brominated flame retardants have cleared the initial screening stage under the Stockholm Convention on Persistent Organic Pollutants. At its 22nd meeting in Rome (21–25 September 2026), the Convention’s POPs Review Committee concluded that decabromodiphenylethane (DBDPE) and bis(2-ethylhexyl) tetrabromophthalate (TBPH) meet the screening criteria under Annex D. Both now enter a more detailed Annex E risk assessment, with draft risk profiles expected at POPRC-23 in October 2027; a formal listing decision is not anticipated before 2029 at the earliest for TBPH.
The implications reach beyond the Convention itself. Both substances are already on ECHA’s REACH Candidate List for their very persistent and very bioaccumulative properties — TBPH since January 2023 and DBDPE since November 2025 — so relevant supply-chain communication duties already apply. ECHA is also progressing possible EU restrictions on certain aromatic brominated flame retardants.
What it means for the tape value chain
DBDPE and TBPH are documented in polymer materials and have reported uses in adhesives and sealants; TBPH is also associated with flexible PVC, films and sheeting. Afera stresses that the priority today is substance identification rather than assuming exposure: tape manufacturers and their suppliers should check backing materials, flame-retardant additives and adhesive formulations — especially where electrical, automotive or construction applications demand high fire performance. The Stockholm Convention Secretariat is inviting technical information on uses, alternatives, socioeconomic impacts and possible exemptions until 4 December 2026, and Afera is collecting member input ahead of that deadline.
The takeaway for the industry is clear: knowing precisely what enters a tape construction, which obligations already apply, and where future substitution may be required is becoming a core competence for every converter and brand owner operating in the European market.
Source: Afera — “Phthalates and flame retardants put tape materials under scrutiny” (26 October 2026)
VIP会员
