会员登录|免费注册|忘记密码|管理入口 返回主站||保存桌面|手机浏览|联系方式
VIP   VIP会员第1年

Shenzhen Chinian Adhesive Industry Co.,ltd  
加关注0

3M Double side adhesive tape / single side adhesive tape/ 3M Dual lock

搜索
新闻分类
  • 暂无分类
联系方式


请先 登录 或 注册 后查看


站内搜索
 
荣誉资质
  • 暂未上传
友情链接
  • 暂无链接
首页 > 公司新闻 > Cambridge Team Turns a Liquid-Crystal Polymer Into a Reusable, Heat-Releasable Adhesive Tape
公司新闻
Cambridge Team Turns a Liquid-Crystal Polymer Into a Reusable, Heat-Releasable Adhesive Tape
2026-10-307

Cambridge Team Turns a Liquid-Crystal Polymer Into a Reusable, Heat-Releasable Adhesive Tape

A research group at the University of Cambridge has reworked a class of soft, molecularly ordered polymers into a working pressure-sensitive adhesive that bonds on a light touch, releases cleanly with gentle heat, and can be used again — a result the team says points toward adhesives better suited to repair, reuse, and electronics recycling.

The e-waste problem hiding in plain sight

Modern devices — smartphones, laptops, wearables — are increasingly assembled with permanent adhesives that were never designed to come apart. With global electronic waste now exceeding 60 million tonnes a year, those stubborn bonds make disassembly, repair, and material recovery far harder than they should be. Recyclers have taken to calling discarded electronics "urban mines" precisely because the valuable materials locked inside are so difficult to reach, and adhesives are a large part of why.

From liquid-crystal elastomers to a real PSA

The Cambridge work, led by Mohand Saed, did not start with adhesives at all. It started with liquid-crystal elastomers (LCEs): rubber-like polymers whose molecules can switch between an ordered (nematic) state and a disordered (isotropic) state. Earlier observations showed that adhesion in the ordered phase could be more than twice as strong as in the disordered phase — a hint that phase-switching might turn stickiness on and off. The obstacle was stiffness: conventional LCE networks are too rigid to conform to a surface the way a true pressure-sensitive adhesive must.

That rigidity is not a minor detail. Decades ago, Carl Dahlquist at 3M framed the rule that a genuine pressure-sensitive adhesive has to stay soft at room temperature, with a glass-transition temperature below 0 °C. Conventional acrylic liquid-crystal elastomers sit far outside that window, with glass-transition temperatures from roughly 10 °C up to nearly 200 °C and storage moduli that are orders of magnitude too high.

Redesigning the network, not the chemistry

Rather than invent a new chemistry, the team asked whether the polymer network itself could be re-architected. The answer was a small additive: a chain-transfer agent introduced during polymerization. By repeatedly terminating and restarting growing chains, it produces a softer, more flexible network with fewer effective crosslinks — while preserving the liquid-crystal behavior that makes the switching possible.

The payoff was dramatic. The material's glass-transition temperature fell from 193 °C to −11 °C, and its stiffness dropped by four orders of magnitude. For the first time, an acrylic liquid-crystal elastomer behaved like a genuine pressure-sensitive adhesive: it bonded within seconds under light pressure and released cleanly when gently heated. In tests it supported a 500 g weight, remained fully reusable across repeated bond-release cycles, and adhered reliably to glass, metal, rubber, and 3D-printed plastics.

Why it matters for tape makers

The researchers highlight wearable medical sensors as a near-term application, where a gentle warming could allow painless, residue-free removal of a device that is then reused. Because the approach stays within the well-established world of acrylic polymers — the chemistry that already dominates the global pressure-sensitive adhesive market — the team argues it is inherently scalable and compatible with existing coating and converting processes. For converters and tape suppliers, the direction is the same one the industry keeps circling: bonds that can be formed and undone on command make products easier to repair, refurbish, and recycle.

The underlying study, "Reversible acrylic pressure-sensitive adhesives based on liquid crystal elastomers enabled by thiol chain transfer agent," appears in Communications Materials (Nature).

Source: Springer Nature (Research Communities / Communications Materials) — "Sticky on Demand: Building a Smarter Adhesive from Liquid Crystals" by Mohand Saed, University of Cambridge; original study: https://www.nature.com/articles/s43246-026-01260-4