Tape covers most bonding jobs, but three situations keep pushing engineers to something else: a substrate with too little surface energy for any tape, a bond line that must carry structural load, or a joint that has to open and close again. 3M answers those three cases with Primer 94, the Scotch-Weld DP structural adhesive range and Dual Lock reclosable fasteners. This note explains where each one belongs.
1. Primer 94: make the tape work where it normally would not
Primer 94 is an adhesion promoter, not an adhesive. Brushed or sprayed on a cleaned surface and left to dry, it leaves a thin active film that lets a pressure-sensitive tape or a structural adhesive build a proper bond on low surface energy plastics such as PP and PE, on rubber, and on painted or powder-coated metal. Use it when a tape that performs well on steel lifts at the edges on a plastic housing, or when humidity and heat start to creep the bond line. Typical jobs: automotive trim and badge attachment, bonding EPDM and TPE seals, and preparing powder-coated panels before VHB.
2. Scotch-Weld DP: structural bonds without welding
The DP range is a two-part cartridge system, dispensed with a hand gun or automated equipment. Mixing happens in the static mixer, so there is no weighing and no pot-life guesswork on the line. Choose by chemistry and by how much flexibility the joint needs:
| Model | Chemistry | Where it fits |
| DP460 | Two-part epoxy | High shear and peel strength on metal; the default choice for structural joints |
| DP420 | Toughened epoxy | Impact and peel resistance where the joint sees shock or flexing |
| DP810 | Two-part acrylic | Fast build on plastics and oily metal; good for mixed-material assemblies |
| DP8010 | Two-part acrylic | Longer open time for larger parts and panel assembly |
| DP100 | Rigid epoxy | Fast, high-strength bonds on metal where the joint must stay stiff |
| DP110 | Flexible epoxy | Dissimilar materials with different thermal expansion |
| DP190 | Flexible epoxy | Longer work life, semi-flexible bond for larger area joints |
| DP270 | Rigid epoxy | Potting and encapsulation of electronic or mechanical parts |
3. Dual Lock: a fastener, not a tape
Dual Lock uses interlocking mushroom-shaped heads instead of an adhesive bond. Press two pieces together and they close with an audible snap; peel them apart and the joint opens again, up to 1,000 times before it loses half of its original tensile strength. That makes it the right answer for access panels, removable signage, trim that has to come off for service, and for mounting where vibration would fatigue a screw thread.
Selection comes down to two variables: adhesive and stem density. SJ3540 with synthetic rubber adhesive is the indoor choice for aluminium, stainless, acrylic, PC, ABS and powder-coated paint. SJ3550CF and SJ3560 with firm acrylic adhesive extend to glass and to indoor/outdoor use; SJ3560 is the clear version for visible joints. SJ3870 uses a conformable modified acrylic for curved panels. For low-profile gaps, SJ4580 keeps the hold with roughly half the engaged thickness.
How to choose between the three
Bond fails at the surface, not in the joint: Primer 94 plus the tape you already use.
Joint must carry load, fill a gap or survive continuous shear: a DP structural adhesive.
Joint must open and close, or the part needs service access: Dual Lock.
Supply from GTS Industrial
ShenZhen GTS Industrial Co.,Ltd stocks the 3M Dual Lock SJ35 series, the full Scotch-Weld DP range and Primer 94 alongside our tape lines, and supplies them with batch traceability for production use. Custom die-cut Dual Lock shapes, slit tape widths from 3 mm, and sample kits for qualification testing are available on request. Tell us the substrate, the load and the service temperature and we will shortlist the grade for you.
VIP会员
