Epoxy is not one product. The 3M Scotch-Weld range covers everything from a 50 mL cartridge for a repair bench to a 2-gallon kit for a production line, and picking the wrong one shows up later as a bond that fails in shear, or a joint that takes a day to cure when you needed an hour. This note maps the seven grades we stock most often and explains the two products that make them work on difficult surfaces.
| Grade | Format | Where it fits |
| DP460EG | 50 mL Duo-Pak cartridge | The default structural epoxy: high shear and peel strength on metal, ceramic and rigid plastic. Start here unless you have a reason not to. |
| DP420LX | 50 mL Duo-Pak cartridge | Toughened version for joints that see impact, peel or differential thermal expansion between dissimilar materials. |
| DP490 | 400 mL cartridge | Black, gap-filling structural grade for larger assemblies where the bond line is not perfectly flat. |
| 1386 | 1 quart can | Cream-coloured general purpose epoxy for workshop bonding and repair where a cartridge is not practical. |
| 2214 | 5.9 fl oz cartridge | Non-metallic filled, so it can be machined and drilled after cure. Good for filling and rebuilding metal parts. |
| 1838 | 1.8 quart kit (B/A) | Green high-strength epoxy supplied as separate part B and part A, for volume work with a longer working time. |
| 2158 | 2 gallon kit (B/A) | Grey, long open time, made for large-area bonding where you need time to position and clamp. |
The two products that decide whether the bond holds
3M Scotch-Weld Metal Primer 3901 is the step most people skip. On bare steel, aluminium or galvanised sheet, an epoxy bonds to an oxide layer that is weakly attached to the metal underneath - the adhesive holds, the oxide lets go. A thin coat of 3901, flashed off before bonding, gives the adhesive a surface it can actually grip. It is also the fix when a joint passes initial testing and then fails weeks later in a humid or salt-laden environment.
3M Scotch-Weld Repair Paste RP-2110 is a two-part urethane, not an epoxy, and it is the right tool for a different job: rebuilding worn shafts, filling gouges and restoring a surface that has to be machined or filed back into shape. It cures fast enough to be worked the same shift.
How to choose in three questions
Is the surface bare metal or freshly machined? Prime it with 3901 before any epoxy - this is the single biggest cause of field failures.
Does the joint need to move, absorb impact or join dissimilar materials? DP420LX rather than DP460EG.
How much time do you need to position the part? Cartridge grades for bench work, 1838 or 2158 kits when the assembly is large and the open time matters more than speed.
Also new in stock
Alongside the adhesives this week we listed the 3M tape grades that usually sit next to them on the line: 250 flatback masking, 361 glass cloth, 2929 duct, 9457 / 9773WL+ / 9379 adhesive transfer tapes, 1350F-2 polyester and 1700 / 175 vinyl electrical tapes, 1579GCW-WM insulation jacketing, and the Dual Lock SJ4570 low-profile fastener.
Supply from GTS Industrial
ShenZhen GTS Industrial Co.,Ltd stocks the Scotch-Weld epoxy range, Metal Primer 3901 and RP-2110 repair paste with batch traceability, and supplies them alongside our 3M, tesa, Nitto and Sekisui tape lines. Cartridges and kits ship from Shenzhen, normally within 7 days. Tell us the substrates, the gap and the service temperature and we will shortlist the grade - samples are available for qualification.
VIP会员
