会员登录|免费注册|忘记密码|管理入口 返回主站||保存桌面|手机浏览|联系方式
VIP   VIP会员第1年

Shenzhen Shawn Industrial Co.Ltd  
加关注0

工业用品/胶带

搜索
新闻分类
  • 暂无分类
联系方式


请先 登录 或 注册 后查看


站内搜索
 
荣誉资质
友情链接
  • 暂无链接
首页 > 公司新闻 > PET Film Tapes: Where a 50-Year-Old Backing Still Wins
公司新闻
PET Film Tapes: Where a 50-Year-Old Backing Still Wins
2026-11-107

PET Film Tapes: Where a 50-Year-Old Backing Still Wins

Published by ShenZhen Shawn Industrial Co.,Ltd — November 10, 2026

Every few years someone announces that acrylic foam has made the PET film tape obsolete. Then a design engineer needs a 0.03 mm bond line inside a phone, or a splice that survives a reflow oven, and the polyester backing comes straight back.

What polyester actually brings

PET film is dimensionally stable under tension, does not stretch when a converter pulls it through a rotary die, and holds its shape at temperatures that would soften a PE liner. That combination is why PET-carried tapes dominate three jobs: splicing, permanent bonding in thin assemblies, and electrical insulation where the bond line has to stay thin.

The trade-off is stiffness. A PET tape does not conform to a curved surface the way a tissue or foam tape does, so a design that needs to wrap a radius usually wants a different carrier.

The grades we ship most

Our tesa PET line runs from 0.03 mm to 0.1 mm. The thin end is used for splicing and for bonding foils and shields, where every micron of bond line shows up in the stack height. The thicker end is used where the joint needs to bridge a small gap or where the part has to survive a die-cut and pick-and-place cycle without the adhesive flowing.

For 3M equivalents, the 850 and 8412 series cover the same ground with a silicone adhesive for high-temperature masking and splicing, while the double-coated PET products handle permanent assembly.

Three things to check before you specify

Contact area: PET tapes are usually applied with a squeegee or a laminator, not finger pressure. A 2 kg roller pass at 10 mm/s gives a very different result from a hand press, and the difference shows up months later as a bond failure.

Surface energy: polyester adhesive systems bond well to metals and to most engineering plastics, but untreated PP and PE need a primer or a different chemistry.

Temperature: short excursions are not the same as continuous service. Ask for both numbers, and check them against the actual reflow or bake profile rather than the data sheet alone.

ShenZhen Shawn Industrial Co.,Ltd stocks tesa and 3M PET film tapes in log rolls and slit rolls, and converts to drawing on a die-cutting press.

tesa and 3M are trademarks of their respective owners. Specifications quoted from the manufacturers' published product data; confirm the current TDS before production release.