3M tape products that account for the largest share of its industrial tape shipments, spanning structural foam bonding, general-purpose double-coated assembly and electrical insulation.
The six lines fall into four groups. In structural bonding, 3M™ VHB™ Tape 5952 — a 1.1 mm black acrylic foam tape — and 3M™ VHB™ Tape 4991 — a 2.3 mm grey acrylic foam — are the workhorses for automotive trim, signage and cladding where rivets, screws and welding are being designed out. For general assembly, 3M™ Double Coated Tissue Tape 9448A (0.15 mm) and 3M™ Double Coated Tape 9080A (0.16 mm) dominate nameplate, film and small-component attachment, both built on acrylic adhesive systems with high initial tack and strong high-temperature holding power.
Where bond-line thickness must be minimal, 3M™ Adhesive Transfer Tape 467MP provides a 0.06 mm (2.3 mil) acrylic adhesive layer for splicing, laminating and metal-to-plastic bonding on high-surface-energy substrates, with short-term heat resistance to 204 °C (400 °F). In electrical work, 3M™ Scotch® Super 33+ Vinyl Electrical Tape remains the reference product — 0.178 mm (7 mil) PVC, rated to 600 V and 105 °C, flame-retardant and UL listed, with reliable performance from −18 °C to 105 °C.
"Customers rarely buy a single tape any more — they buy a bonding system,"A vehicle interior programme might use VHB for the structural bracket, 9448A for the decorative film and 467MP inside the electronics module. Our value is matching the right grade to each joint and supplying it in the converted format the line actually needs."
All six products are held in stock and available in slit, die-cut and custom roll formats. The company also provides substrate testing and adhesion verification for new programmes.
VIP会员
