We have added 50 tesa industrial tape SKUs to our Shenzhen stock, taking the tesa range we hold from 60 to 110 listings. The additions follow the same rule we apply to every brand we distribute: only constructions that a converter or contract manufacturer will actually specify, with the tesa construction data published on the listing rather than hidden behind a data sheet request.
What was added
| Family | New SKUs | Thickness range | Typical job |
| PET double sided | 9 | 30 µm to 350 µm | Nameplates, displays, membrane switches, differential bonding |
| Non-woven double sided | 5 | 75 µm to 160 µm | Paper, felt, foam and textile lamination |
| Transfer tape (no carrier) | 7 | 50 µm to 220 µm | Thin bond lines, low-VOC and LSE assembly |
| Acrylic foam | 7 | 300 µm to 1,200 µm | Trim, emblems, panel stiffening, primerless LSE bonding |
| PE foam | 5 | 150 µm to 1,600 µm | Lightweight mounting on plastics and painted metal |
| Conductive | 5 | 17 µm to 1,000 µm | EMI shielding, FPC grounding, connector wrapping |
| Cloth | 4 | 230 µm to 310 µm | Duct sealing, bundling, heavy-duty protection |
| Paper masking | 4 | 105 µm to 220 µm | Paint masking, sharp colour edges, workshop bundling |
| MOPP strapping | 3 | 95 µm to 175 µm | Carton and pallet bundling, profile strapping |
| Stretch release | 1 | 1,100 µm | Battery fixation and debonding on demand |
Why these families and not the full catalogue
tesa publishes more than 1,300 industrial products. A distributor that lists all of them creates a catalogue nobody can search and a stock profile nobody can finance. The 50 additions were selected against three filters: the construction has to be one that appears in real bill of materials work (PET carriers, acrylic foam, conductive fabric, masking paper), it has to be available in log roll for slitting rather than only as a finished narrow roll, and it has to sit alongside a construction we already stock so a buyer can compare thickness and adhesive system in one place.
That is also why the listings carry the tesa figures directly: total thickness, adhesive type, backing and adhesion to steel are on the page, so a buyer can shortlist without opening a single PDF.
What this changes for buyers
Two practical things. First, mixed pallets. Buyers who previously split an order between a 3M transfer tape and a tesa foam tape across two suppliers can now consolidate the adhesive purchase with the converting step, which is where most of the lead time actually sits. Second, thickness continuity: the PET range now runs from 30 µm to 350 µm, the acrylic foam range from 300 µm to 1,200 µm, so a design change from a 0.1 mm bond line to a 1.1 mm gap fill no longer means changing supplier.
Stock, slitting and documentation
All 50 SKUs are held as log roll and can be supplied as slit roll to your width or die-cut part to drawing. Standard stock widths ship in 3 days; custom slitting and die-cut samples are quoted on drawing. Export orders ship with RoHS and REACH documentation, and we can supply the tesa technical data sheet for any of the listed constructions on request.
If you are selecting between two constructions, send the two substrates, the service temperature and the gap you need to fill — that is usually enough to narrow it to one family before a sample is cut.
VIP会员
