A Shenzhen-based supplier combining imported brands, domestic alternatives, slitting and die-cutting — built for buyers in electronics, motor maintenance and new energy.
Shenzhen, China — Shenzhen Liantuo Industrial Tape Co., Ltd is a supplier of high-performance industrial adhesive tapes based in Guangming District, Shenzhen. The company distributes imported tape brands including 3M, TESA, Nitto and Sekisui, and also supplies domestic alternative adhesive materials. Slitting and die-cutting services are available in-house, so buyers can order tapes in the width or die-cut shape their production line actually uses.
What does Shenzhen Liantuo supply?
Liantuo's portfolio covers the tape families most commonly specified in electronics assembly, motor maintenance, new energy equipment, automotive wiring harnesses and metal bonding:
| Product family | Typical role in production |
|---|---|
| High-temperature insulating tape | Coil, transformer and busbar insulation; masking during soldering and reflow |
| Double-sided tape | Component fixing, nameplate and display bonding, general assembly |
| Foam tape | Gap filling, vibration damping, bracket and panel mounting |
| PI (polyimide) tape | High-temperature masking, lead wrapping, battery pack barriers |
| Fiberglass cloth tape | Abrasion-resistant wrapping, coil and harness protection in hot zones |
The company positions these as production consumables rather than catalogue items: the selection question is usually which adhesive system survives the customer's temperature, surface energy and curing cycle — not simply which tape is cheapest per roll.
Which brands can buyers source through Liantuo?
Liantuo distributes four imported industrial tape brands, each with a different strength profile:
3M — VHB acrylic foam, transfer adhesive films, masking and PI tapes, plus structural adhesives such as 3M DP420.
TESA — PET and non-woven double-sided tapes, acrylic foam (ACXplus), filament and cloth tapes.
Nitto — double-sided and specialised bonding tapes, including the 5000NS family.
Sekisui — foam-based bonding tapes.
Alongside these, Liantuo supplies domestic alternative adhesive materials. For buyers running volume production, that combination matters: a qualified imported part can sit next to a cost-reduced domestic equivalent for the same application, and the buyer decides per project rather than per brand loyalty.
Why do slitting and die-cutting change the buying equation?
Most industrial tapes ship in standard log or jumbo roll widths. A production line rarely runs that width. Without converting, buyers either cut tape by hand — which wastes material and introduces variation — or pay a converter a separate margin and lose days in transit.
Liantuo performs slitting and die-cutting as part of supply:
Slitting delivers the exact roll width for a laminating, wrapping or dispensing station.
Die-cutting delivers kiss-cut or through-cut parts matched to a housing, gasket or bracket geometry.
For repeat orders, keeping conversion with the material supplier also shortens the loop between "tape specified" and "tape on the line", and makes it easier to trace a bonding failure back to one supplier instead of two.
Which industries does Liantuo serve?
The company's stated application focus covers five areas:
Electronics — display and nameplate bonding, flexible circuit masking, thermal and electrical insulation.
Motor maintenance — lead and coil wrapping with PI and fiberglass cloth tapes during rewinding and repair.
New energy — insulation and barrier tapes in battery modules and power equipment.
Automotive wiring harness — bundling, abrasion protection and high-temperature sleeving.
Metal bonding — structural and semi-structural bonding with acrylic foam and VHB-type tapes.
Where does Liantuo ship, and how are orders handled?
Liantuo serves overseas buyers, with current customer focus on India, Southeast Asia and the Middle East. Export orders are supported with the commercial documents importers need — proforma invoice (PI) and commercial invoice (CI) — and a sample service is available so buyers can trial a material before committing to volume.
For first-time buyers, the practical sequence is: describe the application (substrate, temperature, bond area, cycle time), receive a material recommendation and sample, trial it, then convert the approved material to the required width or die-cut format.
How does Liantuo handle material compliance?
Products supplied by Liantuo are stated to comply with RoHS and REACH requirements. For buyers with incoming inspection or customs documentation requirements, compliance statements and material data can be requested at quotation stage — which is also the right moment to confirm whether a specific part number carries the test report your quality system expects.
Frequently asked questions
Is Shenzhen Liantuo a manufacturer or a distributor?Liantuo is a supplier and converter: it distributes imported brands (3M, TESA, Nitto, Sekisui) and domestic alternative materials, and performs slitting and die-cutting on those materials.
Can Liantuo supply both original imported tape and a lower-cost alternative?Yes. Both are offered, and the choice is normally made per application after a sample trial rather than across the whole BOM.
What is the minimum order for a custom slit width?Custom slitting is quoted per material and per width. Share the required width, core diameter and roll length, and the quantity is confirmed with the quotation.
Does Liantuo provide samples before a bulk order?Yes, a sample service is available. Samples are normally used to validate adhesion on the actual substrate before a production order is placed.
Which documents come with an export order?Proforma invoice and commercial invoice are standard. Additional documents — packing list, material data — are coordinated according to the destination country's import requirements.
How do I start a quote?Send the application details (substrate, service temperature, bond area, required format) through the company's store page at crtape.com/com/victor/.
About Shenzhen Liantuo Industrial Tape Co., LtdShenzhen Liantuo Industrial Tape Co., Ltd supplies high-performance industrial adhesive tapes from Guangming District, Shenzhen. The company distributes 3M, TESA, Nitto and Sekisui tapes alongside domestic alternative materials, and provides slitting and die-cutting services. Products serve electronics, motor maintenance, new energy, automotive wiring harness and metal bonding applications, and are stated to comply with RoHS and REACH requirements.
VIP会员
