会员登录|免费注册|忘记密码|管理入口 返回主站||保存桌面|手机浏览|联系方式
VIP   VIP会员第1年

Shenzhen Liantuo Industrial Tape Co., Ltd  
加关注0

胶带

搜索
新闻分类
联系方式


请先 登录 或 注册 后查看


站内搜索
 
荣誉资质
友情链接
  • 暂无链接
首页 > 公司新闻 > RoHS and REACH: How Liantuo Documents Tape Compliance for Export Buyers
公司新闻
RoHS and REACH: How Liantuo Documents Tape Compliance for Export Buyers
2026-10-2413

Industrial tape is a component in the BOM, so the compliance question is not "is tape regulated" but "can I produce the evidence my customer and my customs broker will accept".

Shenzhen, China — Products supplied by Shenzhen Liantuo Industrial Tape Co., Ltd are stated to comply with RoHS and REACH requirements. For buyers shipping into the EU, the UK or markets that mirror EU substance rules, that statement is the starting point; the documentation package behind it is what closes an audit.

What does RoHS actually restrict in a tape?

RoHS — Directive 2011/65/EU, as amended by (EU) 2015/863 — restricts ten substances in electrical and electronic equipment, including lead, mercury, cadmium, hexavalent chromium, PBB, PBDE, and four phthalates (DEHP, BBP, DBP, DIBP).

For adhesive tape, the risk normally sits in three places:

Where the risk sitsWhat to ask about
Adhesive chemistryStabilisers, plasticisers and residual monomers in acrylic or rubber systems
Pigments and colourantsCadmium or lead-based pigments in coloured or printed tapes
Coatings and primersHexavalent chromium in some surface treatments

A tape used inside an EEE product takes on the product's RoHS obligation. That is why the useful document is not a generic "RoHS compliant" line on a datasheet, but a declaration tied to the specific part number and the ten-substance list.

How does REACH differ from RoHS?

REACH — Regulation (EC) No 1907/2006 — is broader. It governs the registration, evaluation and authorisation of chemicals in the EU, and it applies to articles as well as substances. The operative obligation for a tape buyer is the SVHC (Substance of Very High Concern) candidate list: if an article contains an SVHC above 0.1% by weight, information must be passed down the supply chain, and in some cases notified to ECHA.

The candidate list is updated periodically, so a declaration from three years ago is not necessarily current. Two practical habits keep this manageable:

  1. Ask for a dated SVHC declaration rather than an undated compliance claim.

  2. Re-confirm on the parts that matter when the list is updated, instead of re-confirming the whole BOM.

What documentation should a tape buyer request?

A workable package for an industrial tape shipment usually contains:

  • Material Safety Data Sheet (MSDS) — for the tape or the adhesive system, for shipping and warehouse handling.

  • RoHS declaration — referencing the ten restricted substances and the part number.

  • REACH SVHC declaration — dated, with the candidate list revision it refers to.

  • Test reports — where the customer's incoming inspection or end-customer requires third-party data, coordinated with the manufacturer on a project basis.

Requests are best raised at quotation stage. Chasing a test report after the container has sailed is the expensive version of the same conversation.

Why does compliance documentation matter more for tape than for other consumables?

Three reasons specific to adhesive products:

Tape is rarely the only material on the joint. A bonding failure blamed on the tape often traces back to a primer, a surface treatment or a contaminated substrate. Having material data on file shortens that investigation.

Tape crosses customs as a chemical article. Some destinations ask for MSDS or non-hazardous declarations at import, and a missing document can hold a shipment independent of the product's quality.

Tape is specified into regulated end products. Electronics, automotive harnesses and battery modules all carry their own substance restrictions. The tape inherits them.

Does compliance change when tape is slit or die-cut?

No. Slitting and die-cutting are mechanical operations — no substance is added, removed or substituted. The compliance status of the material carries through to the converted part, provided the same source roll is used and the process does not introduce a new adhesive, primer or coating.

Where converting can create a question is the liner and the packaging: a different release liner or an added interleaving sheet is a different article and should be covered by its own declaration. Buyers specifying a liner change should ask for it explicitly.

Common questions from overseas buyers

Is industrial tape covered by RoHS?Tape itself is not a category listed in RoHS Annex I. The obligation applies to the electrical and electronic equipment the tape is built into, so tape used in EEE is normally required to meet the same ten-substance restriction.

Does Liantuo provide RoHS and REACH declarations?Products supplied are stated to comply with RoHS and REACH requirements, and compliance documentation can be requested with the quotation.

How often should an SVHC declaration be refreshed?The candidate list is updated periodically. Refresh dated declarations when the list changes, and always before a new customer's first shipment rather than after.

What if my customer demands a third-party test report?Test reports come from the material manufacturer. Liantuo coordinates the request; lead time depends on the brand and the test scope, so raise it before the order is confirmed.

Is an MSDS required for every tape shipment?Not for every destination, but it is routinely requested for air freight and for customs review. It is supplied for the tape or the adhesive system as applicable.

Do domestic alternative tapes carry the same declarations?The declaration requirement is the same; the specific documents should be confirmed per part number, since they are issued against a specific material rather than a product family.


About Shenzhen Liantuo Industrial Tape Co., LtdShenzhen Liantuo Industrial Tape Co., Ltd supplies high-performance industrial adhesive tapes from Guangming District, Shenzhen, and states that its products comply with RoHS and REACH requirements. The company distributes 3M, TESA, Nitto and Sekisui tapes plus domestic alternatives, with slitting and die-cutting available, serving electronics, motor maintenance, new energy, automotive wiring harness and metal bonding buyers.