3M Electrical Insulation Tapes Compared: 33+, 35, 88, 130C, 70 and 27

   2026-11-09 ShenZhen GTS Industrial Co.,Ltd12
核心提示:How to pick the right 3M electrical tape: thickness, temperature class and voltage rating for 33+, 35, 88, 130C, 70, 23, 69 and 27. GTS Industrial stocks the full range with slitting and die-cutting support.

Electrical maintenance teams rarely need "a tape" — they need the right one for the joint in front of them. A 0.178 mm vinyl tape, a 0.76 mm rubber splicing tape and a 0.3 mm self-fusing silicone tape solve three different problems, and using the wrong one is the most common cause of a failed splice. Here is how the 3M range actually splits.

The comparison table

ModelTypeThicknessMax. tempVoltage
3M 33+Vinyl, professional grade0.178 mm105 °C600 V
3M 35PVC colour coding0.178 mm121 °C600 V
3M 88Heavy duty vinyl0.216 mm105 °C600 V
3M 23Rubber self-bonding0.76 mm130 °C—
3M 130CEPR rubber splicing0.76 mm90 °C69 kV
3M 70Self-fusing silicone0.30 mm180 °C35 kV
3M 27Glass cloth0.178 mm150 °C—
3M 69Glass cloth, Class H0.178 mmClass H—

Data as published by 3M. Temperature values are maximum operating temperature; confirm the current TDS before specifying.

Choosing by job, not by habit

  • Insulating a 600 V joint: 33+ is the default professional vinyl tape — 0.178 mm, 105 °C, flame retardant, and it stays flexible below freezing. Reach for 88 when the cable runs in a harsh, abrasive or wet location: the 0.216 mm backing takes far more mechanical abuse.

  • Splicing medium voltage cable: 130C is the EPR splicing tape, rated to 69 kV with 0.76 mm per layer. Build the wall thickness specified for the cable class, then over-wrap with 33+ or 88 as the jacket. Tape 23 does the same job at lower voltages and is the classic moisture barrier over a rubber splice.

  • Anything above 130 °C: 27 (glass cloth, 150 °C) for holding and insulation in motors and transformers, 69 for Class H coil wrapping, and 70 (silicone, 180 °C) where flexibility and weather resistance matter more than mechanical strength.

  • Identification: 35 in seven colours for phase and circuit marking — cheaper and cleaner than tagging.

The double-coated companion

Electrical assemblies rarely stop at insulation. tesa 4965 — a 205 µm PET double-coated tape rated 100 °C continuous and 200 °C short term — is the standard choice for fixing busbars, insulators and nameplates inside the enclosure, and tesa 52330 handles the thicker, more conformable joints. Both are stocked alongside the 3M range so one shipment covers the whole bill of materials.

Stock, slitting and support

ShenZhen GTS Industrial Co.,Ltd holds 3M 33+, 35, 23, 69, 88, 130C, 70, 27, 233+ and 9448A together with the tesa, Nitto and Sekisui ranges. Rolls ship in standard widths or slit from 3 mm, and die-cut parts are produced to drawing.

Tell us the voltage class, conductor size and ambient temperature — we will confirm the tape build and send a sample.

 
举报收藏 0
更多>同类资讯
  • jack
    加关注0
  • 没有留下签名~~
推荐图文
推荐资讯
点击排行
网站首页  |  关于我们  |  联系方式  |  用户协议  |  隐私政策  |  版权声明  |  排名推广  |  广告服务  |  积分换礼  |  网站留言  |  帮助中心  |  网站地图  |  违规举报
粤ICP备15110205号