TESA ACXplus 70725: 2,400µm Foam Tape for Gap Filling & Stress Relief

核心提示:In industrial structural bonding, filling large gaps and compensating for thermal deformation of materials are critical challenges. The tesa ACXplus 70725 , with its 2,400µm acrylic foam core , delive

Tel (Whatsapp) +86 18065315079 / Email : Jason@szxytape.com

In industrial structural bonding, filling large gaps and compensating for thermal deformation of materials are critical challenges. The tesa ACXplus 70725, with its 2,400µm acrylic foam core, delivers the ultimate structural bonding solution for heavy-duty applications.

I. Core Product Positioning

The tesa ACXplus 70725 is a structural adhesive tape specifically engineered for large gap filling, ideal for:

✔ Frameless glass partition installation (thermal expansion compensation)
✔ Seismic-resistant mounting of heavy decorative panels (94.5mil thick cushioning)
✔ Permanent bonding of dissimilar materials (metal/plastic/glass)
✔ Short-term fixation in high-temperature zones (withstands 220°C)
✔ Long-term outdoor structural assembly (-20°C to 80°C cycling)

II. Technical Specifications at a Glance

ParameterTechnical DataIndustry Significance
Core MaterialAcrylic foamAbsorbs up to 3mm assembly tolerances
Adhesive TypePure acrylic2x more weather-resistant than rubber-based adhesives
Total Thickness2,400µm / 94.49milOne of the thickest structural tapes in the industry
Short-Term Temp. Resistance220°C / 428°FWithstands high-heat processes like welding
Long-Term Temp. Resistance120°C / 248°FExceeds most industrial equipment operating temps
Thermal Cycling Range-20°C to 80°CCompensates for 0.5% material thermal expansion

III. Key Advantages

1. Master of Large Gaps
With 2.4mm thickness, it fills up to 3mm assembly gaps—5x better than conventional tapes.

2. Thermal Stress Manager
Compensates for 0.45mm/m thermal expansion mismatch between glass and metal, reducing delamination risk by 99%.

3. High-Temp Performance Leader
220°C short-term heat resistance makes it ideal for temporary fixation in welding zones on heavy machinery.

IV. Typical Applications

  • Structural bonding of frameless glass partitions

  • Mounting large decorative panels in high-speed train cabins

  • Industrial equipment insulation installation

  • Metal support strip bonding for building facades

  • Heavy machinery guard assembly

V. Technical Q&A

❓ Q: Is it suitable for ship bulkhead bonding?
→ Absolutely. Passes 4,000-hour salt spray test with >92% strength retention (ISO 9227 standard).

❓ Q: What’s the bond strength on tempered glass?
→ 1.2 MPa shear strength after proper surface prep (EN 15434 standard).

❓ Q: Does it work on curved surfaces?
→ Yes. The foam core compresses up to 30%, conforming to curves with >50mm radius.

 
举报收藏 0
更多>同类资讯
  • Jason
    加关注0
  • 没有留下签名~~
推荐图文
推荐资讯
点击排行
网站首页  |  关于我们  |  联系方式  |  用户协议  |  隐私政策  |  版权声明  |  排名推广  |  广告服务  |  积分换礼  |  网站留言  |  帮助中心  |  网站地图  |  违规举报
粤ICP备15110205号