Tel (Whatsapp) +86 18065315079 / Email : Jason@szxytape.com
I. Core Product Positioning
Engineered for high-precision electronics assembly, this black PET tape delivers:
✔ Secure mounting for mobile phone lenses and touch panels
✔ 200℃ short-term temperature resistance
✔ 100μm ultra-thin profile for discreet bonding
II. Technical Parameters
| Parameter | Specification | Industry Value |
|---|---|---|
| Base Material | Black PET Film | 50% elongation for curved surfaces |
| Adhesive | Tackified Acrylic | 20N/cm tensile strength |
| Thickness | 100μm (3.94mils) | Industry-leading strength-to-thickness |
| Short-Term Temp | 200℃ (30min) | Withstands SMT reflow processes |
| UV Resistance | >90% after 500h QUV | Suitable for outdoor applications |
III. Key Advantages
1. Ultra-Thin High Strength
20N/cm bond strength at just 100μm thickness
Case: Improved smartphone lens assembly yield by 15%
2. High-Temperature Performance
Stable at 200℃ for 30 minutes
40℃ higher than standard alternatives
3. Optical Clarity
Light transmission <0.1%
No interference with optical components
4. Environmental Stability
Passes 1000h 85℃/85%RH testing
Resists oils and soft chemicals
IV. Application Guidelines
1. Camera Module Assembly
Use Case: Lens-to-housing bonding
Procedure:
Plasma treat metal surfaces
Apply 0.3MPa pressure for 5s
Full cure in 24h
2. Display Panel Mounting
Precautions:
Avoid alcohol-based cleaners
Long-term use ≤100℃
V. Technical Q&A
❓ Q: Suitable for curved displays?
→ Compatible with ≥5mm radius curves (pre-forming required)
❓ Q: vs 3M 966?
→ 25% thinner with 50℃ higher temp resistance




