tesa ACXplus 70xx Series: Structural Bonding for High Temperature Applications

   2026-11-06 ShenZhen GTS Industrial Co.,Ltd10
核心提示:How tesa ACXplus 70xx acrylic foam tapes replace screws and rivets in high temperature assemblies. GTS Industrial compares 70350, 7062, 7063, 7065, 7066, 7072, 7078 and 70730 with thickness, temperature and adhesion data.

As OEM designs move toward thinner housings, mixed-material assemblies and hidden fastening, acrylic foam tapes have replaced mechanical fixings in a growing share of production lines. The tesa® ACXplus 70xx series is one of the most widely specified platforms for this work: a viscoelastic acrylic foam core that distributes stress across the whole bond area instead of concentrating it at drilled holes.

Unlike a rigid adhesive, the foam core absorbs impact, compensates for differential thermal expansion between aluminium, steel, glass and engineering plastics, and seals the joint against moisture at the same time.

Two temperature classes, one platform

The 70xx family splits into a standard class and a high-temperature class. Both share the same construction and converting behaviour, so a project can move between them without changing its die-cut tooling.

  • Standard class (70 °C / 170 °C): 7062, 7063, 7065 and 7066 — the general workhorses for exterior trim, signage, appliance panels and frame bonding.

  • High temperature class (120 °C / 220 °C): 7072, 7078 and 70730 — for powder-coat bake lines, e-coat processing, engine-adjacent parts and any joint that sees elevated service temperature.

  • Transparent option: 70350, a clear 500 µm foam for glass-to-glass and design-visible joints where a black core would show.

Thickness range covers the gap

ModelTotal thicknessColourLong term / short termTypical use
tesa 70350500 µmClear60 / 90 °CTransparent structural bonding
tesa 7062500 µmBlack70 / 170 °CMetal and plastic panels
tesa 7063800 µmBlack70 / 170 °CSignage and frames
tesa 70651,200 µmBlack70 / 170 °CThick gap bonding
tesa 70661,500 µmBlack— / —Uneven surfaces
tesa 7072500 µmBlack120 / 220 °CHigh temperature bonding
tesa 70782,000 µmBlack120 / 220 °CLarge gap, outdoor panels
tesa 707302,900 µmBlack120 / 220 °CHeavy duty frame bonding

Design guidance from the shop floor

  • Choose thickness by gap, not by habit. A 500 µm tape cannot fill a 1 mm weld seam; a 2 mm foam used on a flat machined surface wastes cost and adds peel stress.

  • Respect the pressure rule. Acrylic foam is pressure sensitive: bond strength scales with roller pressure. Two passes at 10 N/cm on a 50 mm wide strip is the usual starting point.

  • Watch the LSE substrates. Untreated PP and PE need the primerless-modified grades rather than the standard 70xx adhesives — ask us for the correct pairing before the tooling is cut.

  • Bake lines need the 120 °C class. Standard 70xx tapes should not go through a powder-coat oven.

Stock, slitting and die-cutting

ShenZhen GTS Industrial Co.,Ltd holds the 70xx range together with tesa PET double coated, tissue, masking, MOPP, Bond & Detach and HAF heat activated films. Jumbo rolls are slit from 3 mm, kiss-cut gaskets and pull-tab constructions are produced to drawing, and 3M, Nitto and Sekisui equivalents are available from the same shipment so a project can be dual-sourced.

Send us the substrate pair, gap and service temperature and we will return a recommended grade with a TDS and a sample roll.

 
举报收藏 0
更多>同类资讯
  • jack
    加关注0
  • 没有留下签名~~
推荐图文
推荐资讯
点击排行
网站首页  |  关于我们  |  联系方式  |  用户协议  |  隐私政策  |  版权声明  |  排名推广  |  广告服务  |  积分换礼  |  网站留言  |  帮助中心  |  网站地图  |  违规举报
粤ICP备15110205号